一区二区三区成人-一区二区三区www-一区二区三区 日韩-一区二区日韩欧美-一区二区日韩精品中文字幕-一区二区日韩

liu2004
級別: *
精華主題: * 篇
發帖數量: * 個
工控威望: * 點
下載積分: * 分
在線時間: (小時)
注冊時間: *
最后登錄: *
查看liu2004的 主題 / 回貼
樓主  發表于: 2011-05-04 20:42
要的請留郵箱,太大。
                  


Motion Controller Peripheral Software Package
SW6RNC-GSVHELPE
-------------------------------------------------------------------------


Thank you for purchasing this software.
You should carefully read the following terms and conditions
before using this software. And that you can refer the manuals
of WindowsNT/98/2000/XP to resolve the basic operation of
Windows NT/98/2000/XP.

1. Operating requirements

  (a) Hardware requirements
    ?  100% WindowsNT/98/2000/XP compatible PC/AT
            (not support multi-processor)
    ?   CPU :
                Windows NT/98 : Pentium 133-MHz or more recommended
                Windows 2000  : Pentium II 233-MHz or more recommended
                Windows XP    : Pentium II 450-MHz or more recommended
                 (Pentium II 233-MHz or more for Windows 2000)
    ?   Memory : It depends on the OS environment.
                Windows NT/98 : 32 MB or more recommended.
                Windows 2000  : 64 MB or more recommended.
                Windows XP    : 192 MB or more recommended.
    ?   Free disk: 68 MB or more
    ?   Monitor resolution: SVGA(800*600/256 Colors) or more


  (b) OS requirements
    ?   Windows NT Workstation Ver. 4.0(Service Pack2 or later)
    ?   Windows 98
        ?   Windows 2000
        ?   Windows XP Professional
        ?   Windows XP Home Edition

        * The following Windows version is not supported.
            ? Windows NT 3.5 Workstation
        ? Windows NT 3.51 Workstation
            ? Windows NT Server
            ? Windows 95
        * In Windows NT 4.0,the use needs Microsoft Internet Explorer 3.01
          or higher.

2. Installation method

  First, close any others applications running on Windows NT/98/2000/XP.

  From [Start] select [Run...],input "X:setup.exe"(X: CD-ROM Drive)
or click [Browse] and select "Setup.exe" from the CD-ROM drive.
  After starting the installor , follow the instructions of the installor.

3. Notice

(1) When you install this software to a drive which is compressed by
DriveSpace or other tools, if it freezes in installation, please increase
the free space of the drive or select other drive which is not compressed
to install this software.

(2) If you want to change the installation destination or reinstall it,
please uninstall it before installing it again.

(3) Depending on the system font size of Windows NT/98/2000/XP, sometimes
the screen may not be displayed properly, please use a small size font.



-------------------------------------------------------------------------------------

Microsoft and MS-DOS, Windows, Windows NT are registered trademarks of
Microsoft Corporation in the United States and other countries.

Copyright(c) 2001 MITSUBISHI ELECTRIC CORPORATION All Rights Reserved.
zhang850412
有可以拔13570997576 張工
級別: 工控俠客
精華主題: 0
發帖數量: 256 個
工控威望: 2209 點
下載積分: 13860 分
在線時間: 1092(小時)
注冊時間: 2009-07-19
最后登錄: 2025-07-22
查看zhang850412的 主題 / 回貼
1樓  發表于: 2011-05-04 22:35
謝謝樓主…172492590@qq.com
zyfzxh
級別: 論壇版主

精華主題: 12 篇
發帖數量: 6507 個
工控威望: 7515 點
下載積分: 110271 分
在線時間: 4852(小時)
注冊時間: 2006-08-10
最后登錄: 2025-07-23
查看zyfzxh的 主題 / 回貼
2樓  發表于: 2011-05-05 07:54
http://down.ymmfa.com/?id=24
這裡就有,
請說明樓主的版本?
aaaa0595
級別: 略有小成
精華主題: 1 篇
發帖數量: 247 個
工控威望: 304 點
下載積分: 437 分
在線時間: 77(小時)
注冊時間: 2007-07-01
最后登錄: 2024-08-05
查看aaaa0595的 主題 / 回貼
3樓  發表于: 2011-05-06 11:47
廣東工程
級別: *
精華主題: * 篇
發帖數量: * 個
工控威望: * 點
下載積分: * 分
在線時間: (小時)
注冊時間: *
最后登錄: *
查看廣東工程的 主題 / 回貼
4樓  發表于: 2011-05-06 13:21
謝謝了,樓主
song2007
song2007
級別: 略有小成
精華主題: 0
發帖數量: 110 個
工控威望: 257 點
下載積分: 500 分
在線時間: 311(小時)
注冊時間: 2007-10-31
最后登錄: 2025-07-14
查看song2007的 主題 / 回貼
5樓  發表于: 2011-05-08 16:47
songnr925@163.com
謝謝樓主的無私貢獻。
sxy
級別: 略有小成
精華主題: 0
發帖數量: 67 個
工控威望: 235 點
下載積分: 484 分
在線時間: 90(小時)
注冊時間: 2008-12-25
最后登錄: 2025-01-08
查看sxy的 主題 / 回貼
6樓  發表于: 2011-05-09 02:25
你有沒有 運動CPU  程式呢  發來研究下
good
級別: 略有小成
精華主題: 0
發帖數量: 273 個
工控威望: 489 點
下載積分: 788 分
在線時間: 46(小時)
注冊時間: 2008-04-11
最后登錄: 2022-12-10
查看good的 主題 / 回貼
7樓  發表于: 2011-05-09 21:56
能發一份給我嗎?我的是137612619@qq.com       在此謝過了
lzdcy321
級別: 略有小成
精華主題: 0
發帖數量: 120 個
工控威望: 201 點
下載積分: 682 分
在線時間: 46(小時)
注冊時間: 2010-07-16
最后登錄: 2023-04-15
查看lzdcy321的 主題 / 回貼
8樓  發表于: 2011-05-09 23:05
謝謝了,樓主!!!!!!!!!
leozhaott
級別: 探索解密
精華主題: 0
發帖數量: 28 個
工控威望: 146 點
下載積分: 610 分
在線時間: 11(小時)
注冊時間: 2011-06-20
最后登錄: 2012-08-08
查看leozhaott的 主題 / 回貼
9樓  發表于: 2011-06-21 21:51
我想要SW8RNC-GSVHELPE  用于三菱Q173DCPU的  找了好久都沒找著呢!希望有的能發一個給我!
leozhaott
級別: 探索解密
精華主題: 0
發帖數量: 28 個
工控威望: 146 點
下載積分: 610 分
在線時間: 11(小時)
注冊時間: 2011-06-20
最后登錄: 2012-08-08
查看leozhaott的 主題 / 回貼
10樓  發表于: 2011-06-21 21:53
剛剛忘了郵箱了   郵箱:673721892@qq.com
顧仁仁
級別: 略有小成
精華主題: 0
發帖數量: 338 個
工控威望: 342 點
下載積分: 533 分
在線時間: 202(小時)
注冊時間: 2007-10-28
最后登錄: 2025-06-30
查看顧仁仁的 主題 / 回貼
11樓  發表于: 2011-07-10 11:02
謝謝樓主…  jxgfguren@.163.com

主站蜘蛛池模板: 99re5精品视频在线观看 | 欧洲一级| www.片| 精品免费视在线观看 | 国产一卡2卡3卡4卡公司科普 | 美女扒下内裤让男人桶的图片 | 四虎麻豆 | 亚洲青草视频 | 插美女b| 亚洲精品视频网 | 日本免费不卡在线一区二区三区 | 美女扒开胸罩露出奶了无遮挡免费 | 亚洲欧美日韩精品久久亚洲区 | 99热这里只有精品一区二区三区 | 红色毛片| 农村美女沟厕嘘嘘被偷看 | 日本生活中的玛丽 | caoporn超碰| 精品操 | 国产免费久久精品44 | 午夜伦伦电影理论片费看 | 国产成人亚洲精品91专区高清 | 国产在线视频一区二区三区 | 久久99精品久久久久久园产越南 | 91啦中文在线观看 | 亚洲AV无码乱码国产麻豆穿越 | 久久五月综合婷婷中文云霸高清 | 午夜福利合集1000在线 | 四虎影视永久在线精品免费 | 精品福利一区 | 双性总裁(h) | 激情乱文 | 亚洲国产精品二区久久 | 高清男的插曲女的 欢迎你老狼 | 国产精品亚洲精品日韩已方 | 国产美女久久精品香蕉69 | 日本一区免费观看 | 激情综合色啪啪小说 | 香蕉视频在线观看网站 | 高h生子双性美人受 | 污文啊好棒棒啊好了 |